Company : Greiner Bio One International AG

Category : Laboratory Equipment

Key Products : Blood Collection Tubes, Urine Collection Tubes and specimen collection

VACUETTE® Super-T

Innovative products are often defined by their ease of use and this certainly applies to the VACUETTE® Super-T, the
new tourniquet from Greiner Bio-One. The product is made of virtually untearable silicone. Easy to apply and just as
easy to release by simply pulling with one hand.

VACUETTE® Serum (Sep) Clot Activator

VACUETTE® Serum Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene). The inner wall of the tube has a special coating of microscopic silica particles to activate the coagulation process.

VACUETTE® Trace Element

VACUETTE® Trace Element Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® Lithium/ Ammonium/ Sodium Heparin (Sep)

VACUETTE® Plasma Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® Homocysteine Detection Tube

VACUETTE® Homocysteine Detection Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® Glucose Tubes

VACUETTE® Glucose Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® ESR Sodium Citrate

The tubes contain a 3.2% (0.109 mol/L) trisodium citrate solution. The mixing ratio is 1 part citrate solution to 4 parts blood. The sodium citrate concentration is in accordance to the requirements of the international standards for evacuated blood collection systems - ISO 6710, CLSI H1-A5).

VACUETTE® K2EDTA Sep

VACUETTE® K2EDTA Sep Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® K2EDTA/ K3EDTA

VACUETTE® EDTA Tubes contain EDTA (Ethylenediaminetetraacetic acid) as the additive of choice for the collection of blood specimens intended for haematological parameters. EDTA functions as an anticoagulant by binding calcium.

VACUETTE® Crossmatch

VACUETTE® Crossmatch Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® ACD/CPDA

VACUETTE® ACD / CPDA Tubes are made out of PET (polyethylenetherephtalate). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).

VACUETTE® Coagulation Sodium Citrate 3.2% / 3.8%

VACUETTE® Coagulation outer tubes are made out of PET (polyethylenetherephtalate). VACUETTE® Coagulation inner tubes are made out of PP (polypropylene). The caps are produced from PE (polyethylene) and are coloured by pigments purified in accordance with EN 71/3. The rubber component of the cap is composed of Brom Butyl Caoutchouc. The stabilisation ring is composed of PP (polypropylene).